Media Size - SATO CL412E Operator And Technical Reference Manual

Section 5. Programming Reference
Command Structure
Command Function
Input to Printer:
Printer Output:
Special Notes
Expanded
Page 5-56

Media Size

<ESC>A1aaaabbbb
aaaa = Label Width in dots (0 to Hmax)
bbbb = Label Length in dots (0 to Vmax)
Example: <ESC>A108323200
Placement: Separate data stream to the printer.
Default: <ESC>A108322136 for CL408e
<ESC>A112484800 for CL412e
<ESC>A112161424 for CL608e
<ESC>A119842136 for CL612e
To set the size of the media.
A108321424
Ther is no printer output resulting from this command. It is used to
automatically adjust the offset values for the size of label being used.
The sample command stream specifies a label 832 dots wide by 1424
dots long.
1. The Base Reference point is always the on the right (looking at
the front of the printer) side of the print head. This command
adjusts the Base Reference Point to correspond with the right
edge of the loaded media.
2. If the label size is changed, then this command must be
respecified to center the print image on the label.
3. All eight variables ("aaaa" and "bbbb") must be included in this
command.
Max CL408e
Hmax
aaaa 0832
Vmax
Default
bbbb 1424
bbbb 9999
PN 9001074 Preliminary
CL412e CL608e
1248 1216
2136 1424
9999 9999
SATO CL Series "e" Printers
CL612e
1984
2136
9999