SATO CL412E Operator And Technical Reference Manual page 137

Special Notes
LENGTH
<ESC>A
<ESC>EX0
<ESC>Z
<ESC>A
<ESC>AR
<ESC>Z
SATO CL Series "e" Printers
1. <ESC>EX0 is effective until <ESC>AR is sent to reset the printer
to its standard print length, or until the printer is repowered.
2. It may be included in an independent data stream to specify the
size of the maximum print area:
CL408e
49.2"
1249 mm
9999 dots
7"
178 mm
1424 dots
3. When this command is used with the <ESC>& Store Form
Overlay command the Form length cannot exceed the maximum
specified.
7. If a job contains elements out of the memory range, it is ignored.
8. If the Forms Overlay command <ESC>& is used with Expanded
Memory to expand the print area, the Form Overlay length is still
limited to the maximum..
PN 9001074 Preliminary
Section 5. Programming Reference
CL412e CL608e
32.8 49.2"
833 mm 1249 mm
9999 dots 9999 dots
7" 7"
178 mm 178 mm
2136 dots 1424 dots
CL612e
32.8"
833 mm
9999 dots
7"
178 mm
2136 dots
Page 5-63