SATO CL412E Operator And Technical Reference Manual page 96

Section 5. Programming Reference
Printer Output
Special Notes
Page 5-22
1. When printing the custom character using the Recall command,
the character is affected by the following commands:
Character Expansion
Character Pitch
Line Feed
Rotate, Fixed Base Reference Point
2. The characters are stored in volatile memory and must be
reloaded if the printer power is lost.
3. Do not use ASCII <CR> or <LF> characters (carriage return or
line feed) as line delimiters within the graphic data or the actual
image will not be printed as specified.
PN 9001074 Preliminary SATO CL Series "e" Printers