Cl408 And Cl412 - SATO CL412E Operator And Technical Reference Manual

SWITCHES AND SENSORS
Ribbon End Sensor:
Head Open Switch:
Label Sensor Unit:
Front Access Door
Interlock:
Front Access
Door Interlock
Switch
Inside Label Guide
Backing
Paper Inside
Edge
SATO CL Series "e" Printers
This sensor is a motion detector that signals the printer
when the ribbon supply is turning.
When the print head is opened, this switch is activated
and the printer will stop printing.
This sensor unit contains two types of sensors, one for
label gap and one for Eye-Mark sensing. The sensors
are adjustable over a limited range.
This switch prevents printer operation when the Front
Access Door is open. The Top Access Door must be
open before the Front Access Door can be opened or
closed.
Miminum Eye-Mark Size
.12 in (3 mm) W x .24 in. (6 mm) L
0.25" to 2.1" (6 mm to 53mm)
Eye-Mark Sensor
0.67" to 2.5" (17mm to 64mm)
Label Gap Sensor
Label Inside Edge
CL408e and CL412e Label Sensor Positioning
PN 9001074 Preliminary
Minimum
Inter-Label Gap
0.12" (3 mm)
Note: These positions are different
from the M84XX printers.
Section 2. Installation
CL408e and CL412e
Ribbon
Motion
Sensor
Label
Feed
Direction
Page 2-19