Replacing The Fuse - SATO CL412E Operator And Technical Reference Manual

Section 4: Cleaning and Maintenance
5. Use the cotton swab to clean any foreign matter from the exposed surface of the
sensors.

REPLACING THE FUSE

Supplies needed:
1. Turn the printer power off and remove the power cable.
2. On the back of the printer, locate the Fuse Cap
directly above the AC connector.
3. Unscrew the cap and remove the defective fuse.
4. Replace with a new 250V 3A fuse.
5. Screw the cap back onto the printer and replace the
power cord.
Page 4-6 9001074 Preliminary
CL608e and CL612e
250V 3A Fuse
SATO CL Series "e" Printers