SATO CL412E Operator And Technical Reference Manual page 146

Section 5. Programming Reference
Special Notes
Horizontal
Expanded
Page 5-72
1. A reverse image area is affected by the rotate commands.
Therefore, always assume the printer is in the normal print
orientation when designing and sending the Reverse Image
command.
2. If using reverse images with the form overlay, place this command
before the Form Overlay command in the data stream.
3. If the height and width to be reversed contain other than
alphanumeric data, the area is not printed.
4. If the values specified exceed the maximum ranges, the reverse
image is not created.
5. The maximum allowable settings are as follows:
CL408e
aaaa 001 to 832
Vertical
Default
bbbb 0001 to 1424
bbbb 0001 to 9999
PN 9001074 Preliminary
CL412e CL608e
0001 to 1248 0001 to 1216
0001 to 2136 0001 to 1424
0001 to 9999 0001 to 9999
SATO CL Series "e" Printers
CL612e
0001 to 1984
0001 to 2136
0001 to 9999