Select Customer - Ecom DP3 Operating Instructions Manual

-select the character to be corrected with the
cursor keys <right/left>
-activate the character selection with <F4> and
correct the character
-return to line selection with <F1> and choose
the next line
If all necessary lines are filled out, a file is created
with <F1>. With <ESC> you can leave to select a
control program.

4.3. Select customer

With the help of the software „DP3Report" customer
data can be stored for the use at the DP3 on SD or
MM Card. If the instrument gets switched on and a
SD or MM Card with customer data is inserted a
customer for allocation can be selected with "Search
for/Scroll" / <Enter>:
Scroll:
Select „Scroll", if you want to find the customer with the help of the cursor keys
<up/down>. Further functions are:
<F1> = to the first customer
<F2> = 10 customers forward
<F3> = 10 customers backward
Search for:
Select „Search for", if you want to find the customer by the input of at least 3
connected characters. Edit 3 characters as described in the chapter before and
start the search with <Enter>. All agreements with the character sequence are
picked out. The selection can be paged through with <F3> (with <F1> to the be-
ginning of the selection).
If the desired customer is found, select with <Enter>. With „View/Modify" the
customer data can be viewed and modified.
Format:
This function is usually needed by initial adjustment of the instrument at our facto-
ry (preparation of SD or MM Card for data recording).
Caution: All stored values will be cancelled! Please switch instrument after
formatting off and on again!
Page 10
Customer number
123456789
Name
Customer 1
Street
Street 1
ZIP/City
11111 City 1
DP3_0001.DAT
Tel.
123456789
Others
Customer 1 Others
Customer data
Search for/Scroll
Create new
View/Modify
Format
DP3_0001.DAT
Fr 20.01.12 09:50:33
Customer is selected
ecom-DP3