Identifying Servers (Uid Switch) - NEC E120e-M User Manual

Chapter 2 Preparations
1. Installing Internal Optional Devices
1.4

Identifying Servers (UID Switch)

Using UID (Unit ID) Switch helps you to identify the target server.
When the server is working or before you turn the server off or disconnect a cable from the server, be sure to
identify the target server by using UID Switch first.
To turn UID LED on, press UID Switch. When it is pressed again, the LED will be off.
UID switch/LED
UID switch/LED
47
Express5800/E120e-M User's Guide