Serial To Parallel Converter; Figure 17 Properties Dialog Box - PerkinElmer Photovac 2020 Manual

2020 Software Manual
14. Ensure the file name has a .txt extension. The .txt extension
15. Press Start. Select the Table Format option and then select
16. On 2020, press the ENTER key. Select "Log", "Prnt" and then
17. Select a start time using the "Next" and "Prev" keys. Hold
18. Press the ENTER key, and select the stop time. All entries
19. To terminate communications select Stop from the bottom of
The logged data can now be copied or cut to the Windows Clipboard
and pasted into a text editor, such as Windows' Notepad, or into a
spreadsheet for analysis.
Refer to the Microsoft Windows User's Guide for detailed
instruction on operation of HyperTerminal.

Serial to Parallel Converter

96
Figure 17
will make it easier to use the downloaded data later.
OK. At the bottom of the screen the message, "Receiving
Data" is displayed.
select "Grph" or "Tabl".
down the "Next" and "Prev" keys to scroll through the data
quickly.
between, and including, the start and stop entries will be sent to
the computer. The logged data will begin to appear on the
computer screen. It will be saved to the specified file as it
appears on the screen.
the screen. This will close the text file.
Properties Dialog Box