Sample Line; Figure 19 Connecting 2020 To The Serial To Parallel Converter - PerkinElmer Photovac 2020 Manual

2020 Software Manual
Figure 19

Sample Line

A 3-meter (9') sample line (Part No. MX390006) may be connected
to 2020 for remote sampling. Connect the sample line to the 2020
inlet using the fittings supplied with the sample line.
100
2020
Serial to Parallel
Converter
2020 (supplied with converter)
Printer Cable
Connecting 2020 to the Serial to Parallel
5. Plug the converter into an AC outlet.
6. Turn 2020 on.
7. Ensure the printer has been setup correctly. It must be
on-line. Ensure paper is available and has been aligned
properly.
8. Press the ENTER key. Select "Log", "Prnt" and then
select "Grph" or "Tabl".
9. Select a start time using the "Next" and "Prev" keys.
Hold down the "Next" and "Prev" keys to scroll
through the data quickly.
10. Press the ENTER key, and select the stop time. All
entries between, and including, the start and stop entries
will be sent to the printer.
Printer with
Centronics Port
Parallel Cable
Converter