Library Entries - PerkinElmer Photovac 2020 Manual

2020 Software Manual

Library Entries

Library selections simplify Cal Memory programming, and provide
standard response factors and alarm levels for approximately 70
applications. The name, response factor and three alarm levels are
all set from the library.
You can change any of the values entered in the Cal Memory.
Changes, made to the library information that has been loaded into a
Cal Memory, will have no effect on the original library entry.
NOTE: It does not matter which library or Cal Memory is selected or
which response factor is entered. 2020's response is not
specific to any one compound. The displayed reading
represents the total concentration of all ionizable compounds in
the sample.
See Library on page 54 for details on using libraries to program the
Cal memories.
Compound
Acetaldehyde
Acetone
Acrolein (2-Propenal)
Allyl Chloride (3-Chloro-1-Propene)
3
Benzene
Bromoform (Tribromomethane)
1,3-Butadiene
n-Butanol
n-Butyl Acetate
n-Butyl Acrylate
n-Butyl Mercaptan (Butanethiol)
Carbon Disulfide
Chlorobenzene
174
Code
ACETAL
ACETONE
ACROLEIN
3
ALLCHLOR
BENZENE
BROMFORM
3
13BUTADI
nBUTANOL
nBUTACET
nBUTACRY
nBUTMERC
4
CS2
CHLOBENZ
RF
10.5
1.2
4.0
3.9
0.5
2.0
0.7
3.4
2.3
1.8
0.6
1.3
0.4