Table 2 Averaging Intervals And Periods - PerkinElmer Photovac 2020 Manual

2020 Software Manual
end of the period, the datalogger will be full and you will see an
"Elog" status.
To change the datalogging mode:
56
Averaging
Interval
15 s
1 m
2 m
5 m
15 m
Table 2 Averaging Intervals and Periods
1. Press the ENTER key.
2. Press "Log" and select the "Mode" key.
3. Use the "Next" and "Prev" keys to scroll through the
list.
4. Press the ENTER key. If you select manual operation,
the datalogger will be cleared.
Before the datalogger is cleared, 2020 will confirm your
selection with the prompt "Are you sure?". Press
"YES" to confirm your selection and clear the
datalogger. If you do not want to lose your previously
recorded data, press "NO", then print or save the data
to disk before changing to manual operation. See
Hours of Operation to
Fill the Datalogger
4.1
16
33
83
250