Figure 15 Connect To Dialog Box - PerkinElmer Photovac 2020 Manual

2020 Software Manual
10. The current properties of the selected serial port will be
NOTE: The baud rate setting of 9600 is being used here as an example.
In order for this setting to work, your computer serial port must
be set to send/receive at 9600 baud. If your computer serial
port is set to send/receive at a different baud rate, set the Speed
command and 2020 accordingly.
11. On 2020 the number of data bits has been fixed at 8, stop bits
94
Figure 15
displayed. Enter 9600 as the baud rate (bits per second). This
sets the baud rate at which the computer will receive data from
2020.
has been fixed at 1. Parity has been set at None and the Flow
control is Xon/Xoff. Enter these values and then press OK.
Connect To Dialog Box