Introduction; Features; Option Module Identification; Conventions Used In This Guide - Emerson SI-I/O User Manual

How to use this Safety

Introduction

guide information
3 Introduction
3.1

Features

All connections from the Option module to the drive are made via the drive connector. Connections from external equipment to the SI-I/O are made
via a 3-way plugable/removable screw connector for the two relays, and an 11-way plugable/removable screw connector for the digital and analog
I/O.
Figure 3-1 SI-I/O
All parameters associated with the SI-I/O can be found in section 7 Parameters on page 15.
3.2

Option module identification

SI-I/O can be identified by:
1. The label located on the top of the Option module.
2. The color coding across the front of the SI-I/O (Orange).
Figure 3-2 SI-I/O labels
1 Topside module label
2 Underside module label
3.2.1 Date code format
The date code is split into two sections: a letter followed by a number. The letter indicates the year, and the number indicates the week number (within
the year) in which the Option module was built.The letters go in alphabetical order, starting with A in 1990 (B in 1991, C in 1992 etc).
Example:
A date code of V35 would correspond to week 35 of year 2012.
3.3

Conventions used in this guide

The configuration of the host drive and Option module is done using menus and parameters. A menu is a logical collection of parameters that have
similar functionality. In the case of an Options module, the parameters will appear in menu 15, 16 or 17 depending on which slot the module is
installed to. The menu is determined by the number before the decimal point.
The method used to determine the menu or parameter is as follows:
• Pr S.mm.ppp - Where S signifies the Option module slot number and mm.ppp signifies the menu and parameter number of the Option module's
internal menus and parameters.
• Pr MM.ppp - Where MM signifies the menu allocated to the Option module set-up menu and ppp signifies the parameter number.
Pr mm.000 - Signifies parameter number 000 in any drive menu.
All the inputs/outputs in the SI-I/O are user programmable for function and signal processing.
SI-I/O User Guide
Issue Number: 3
Mechanical Electrical Single line
installation installation descriptions
SI-I/O
1
2
Parameters Block diagrams Diagnostics Technical Data Index
7