Parameter - Emerson SI-I/O User Manual

How to use this Safety
Introduction
guide information
S.03.006 Analog Output 1 Source
Minimum 0.00.000
Default 0.00.000
Type 32 Bit User Save
Slot Menu
Display Format

Parameter

Coding RW, BU
Analog Output 1 Source (Pr S.03.006) defines the source parameter for T11 analog output 1.
NOTE
The analog output is only available on Unidrive M600 - M800.
S.03.007 Analog Output 1 Scaling
Minimum 0.000
Default 1.000
Type 16 Bit User Save
Display Format None
Coding RW, BU
Analog Output 1 Scaling (Pr S.03.007) defines the scaling that is applied to T11 analog output 1.
NOTE
The analog output is only available on Unidrive M600 - M800.
S.03.011 Analog Input 1 Offset
S.03.021 Analog Input 2 Offset
S.03.031 Analog Input 3 Offset
S.03.041 Differential Analog Input Offset
Minimum -100.00
Default 0.00
Type 16 Bit User Save
Display Format None
Coding RW
S.03.012 Analog Input 1 Scaling
S.03.022 Analog Input 2 Scaling
S.03.032 Analog Input 3 Scaling
S.03.042 Differential Analog Input Scaling
Minimum 0.000
Default 1.000
Type 16 Bit User Save
Display Format None
Coding RW, BU
SI-I/O User Guide
Issue Number: 3
Mechanical Electrical Single line
installation installation descriptions
Maximum 4.99.999
Units
Update Rate Background read
Decimal Places
Maximum 40.000
Units
Update Rate Background read
Decimal Places 3
Maximum 100.00
Units %
Update Rate Background read
Decimal Places 2
Maximum 40.000
Units
Update Rate Background read
Decimal Places 3
Parameters Block diagrams Diagnostics Technical Data Index
25