Parameters; Menu 0 - Module Set-Up - Emerson SI-I/O User Manual

How to use this Safety
Introduction
guide information
7

Parameters

7.1

Menu 0 - Module Set-up

All parameters in S.00.ppp (i.e. menu 0 within the option module menus) are also present in menus 15, 16 or 17 depending on the slot that the
module is installed to e.g. Pr 3.00.007 is also present as 17.007.
The functionality and properties of the parameters are identical between the two menus.
S.00.001 Module ID
Minimum 0
Default 209
Type 16 Bit Volatile
Display Format None
Coding RO, ND, NC, PT, BU
Pr S.00.001 displays the ID number for the Option Module. For SI-I/O, this is 209.
S.00.002 Firmware version
0 (Display
Minimum
00.00.00.00)
Default
Type 32 Bit Volatile
Display Format Version Number
Coding RO, ND, NC, PT
The firmware version of the option module is in the format of ww.xx.yy.zz
S.00.003 Hardware version
Minimum 00.00
Default
Type 16 Bit Volatile
Display Format None
Coding RO, ND, NC, PT
The firmware version of the option module is in the format of ww.xx.yy.zz
S.00.004 Serial Number LS
S.00.005 Serial Number MS
Minimum 0
Default
Type 32 Bit Volatile
Display Format None
Coding RO, ND, NC, PT
The module serial number is available as a pair of 32-bit values where Serial Number LS (Pr S.00.004) provide the least significant 8 decimal digits,
and Serial Number MS (Pr S.00.005) provides the most significant 8 decimal digits. The reconstructed serial number is ((S.00.005 x 100000000) +
S.00.004). For example serial number "0001234567898765" would be stored as S.00.005 = 123456 and S.00.004 = 67898765.
SI-I/O User Guide
Issue Number: 3
Mechanical Electrical Single line
installation installation descriptions
Maximum 65535
Units
Update Rate Power-up write
Decimal Places 0
99999999 (Display
Maximum
99.99.99.99)
Units
Update Rate Power-up write
Decimal Places 0
Maximum 99.99
Units
Update Rate Power-up write
Decimal Places 2
Maximum 99999999
Units
Update Rate Power-up write
Decimal Places 0
Parameters Block diagrams Diagnostics Technical Data Index
15