State Information - Omnik Omniksol-15k-TL2 User Manual

7.5 State Information

State
Waiting
Wait
Connect Sec.
Normal Normal
SPI Failure: Communication Fails
between M-S
EEPROM R/W Fail
Relay-Check Fail
DC Injection High
The result of Auto Test Function is fail
DC bus is too high
The voltage reference inside is abnormal
AC HCT Failure
Fault
GFCI Device Failure
Device fault
M-S Version Unmatched
Fac Failure: Fac Out of Range
AC Voltage Out of Range
Utility Loss
GFCI Failure
PV Over Voltage
Isolation Fault
Fan Lock
Over Temperature in Inverter
Consistent Fault:Vac differs for M-S
42
Display State information
Initialization & waiting
Connect
Normal state
SPI Failure: Communication Fails
between M-S
EEPROM R/W Fail
Relay-Check Fail
DC Injection High
The result of Auto Test Function is
fail
DC bus is too high
The voltage reference inside is
abnormal
AC HCT Failure
GFCI Device Failure
Device fault
M-S Version Unmatched
Fac Failure :Fac Out of Range
AC Voltage Out of Range
Utility Loss
GFCI Failure
PV Over Voltage
Isolation Fault
Fan Lock
Over Temperature in Inverter
Consistent Fault:Vac differs for M-S