State Information - Omnik Omniksol-10k-TL3 User Manual

7.4 State Information

State Display
Waiting
Wait Reconnects
Checking's
Normal Normal
Current Fault
Master Grid Freq Fault
Master Grid Freq Fault
PV Voltage Fault
Over Temp Fault
Isolation Fault
Fault
Relay1 Fault
Relay2 Fault
Current DC Offset
Eeprom Fault
SCI Lose
Hole Sense Device Fault Output AC sensor abnormal
GFCI Failure
Flash F/W Updating
About the further information for each fault, please reference to chapter
"9.Troubleshooting".
40
State information
Initialization & waiting
Reconnect
Checking
Normal state
GFCI failure oversized leakage current
Grid frequency failure
Grid voltage failure
Input voltage too high
Temperature abnormal
Isolation failure
Output relay failure
Output DC injection too high
EEPROM problem
Serial communication interface failure
GFCI testing device abnormal
Update