Omnik Omniksol-15k-TL2 User Manual page 30

C：Generation display block
E-total records the total generating capacity of the inverter, E-Today records the day
generating capacity of inverter.
D：Temperature and time display block
Heat sink temperature is in the left side, the internal temperature is in the middle side
and the time is in the right side.
E：PV connection information display block
This mode provides the information of number of PV strings, PV voltage and PV current.
F：AC connection information display block
This mode provides the information of grid single / three phase, grid voltage and grid
current.
G：Communication display block
This modes provides the monitoring connection, includes RS485 communication, GPRS
communication and WiFi communication
7.4.2 Menu display area
Menu display area is divided to two display modes: menu mode and curve mode,
through the "UP" button and "DOWN" key to switch, the following sections will explain
these two modes.
1. work state interface
This interface provides current work status, current national safety regulation and grid
frequency information of current inverter, as shown in figure.
28