Omnik Omniksol-15k-TL2 User Manual page 63

Before troubleshooting, please inquire with your inverter installer whether you are allowed to
remove the cover of the inverter to trouble shoot the module. If not allowed, please contact
customer service.
4)
Set parameters of WiFi module
(a) Open a web browser, and enter 10.10.100.254(the Default IP address of WiFi card,
you may set domain name access, please see the picture 6-14), then fill in username:
admin and password: admin, both of which are admin as default.
Recommended browsers: Internet Explorer 8+, Google Chrome 15+, Firefox 10+
Note:
①
If the IP address shows 0.0.0.0 (factory value) on your LCD (Picture5-4-1), it is not a correct
address. There are 2 cases show 0.0.0.0:
 Not connect router rightly, you need reset to connect you router to make it right
 Card loose in the inverter, please check your inverter, see chapter 4:.WiFi Card Installation
②
The default username & password :admin, admin, we suggest modify the username & password:
Step: choose Account, input your username &password.
(b) In the configuration interface of WiFi module, you can view general information of the
module.
Follow the setup wizard to start quick setting.
admin
admin
61