Omnik Omniksol-15k-TL2 User Manual page 26

2) Insert the striped cable into cord end terminal and insert the assembly into barrel.
3) Then the line will like the picture below.
4) Insert the finished 5 lines into AC cover assembly with the following sequence：
5) Open the plastic cover, use slot type screwdriver to press the shrapnel in the
indicated position, and then put the line in the right hole, please note the sequence
of the line shall in the right order: L1,L2,L3,N,PE
6) Cover the assembly, tightly screwed and then screw the cable gland
24