Control System; 1 Alc-600 Platform Control Module - Genie S-65 XC Service And Repair Manual

Service and Repair Manual

Control System

18
1-1
ALC-600 Control Module
Platform Controls
The platform control box contains the
ALC-600 platform Control Module. The platform
Control Module receives all signals from the
platform switches, joysticks and foot switch, and
provides operator feedback through an Indicator
Module. The joystick controllers at the platform
controls utilize Hall Effect technology and require
no calibration. Automatic calibration of center
voltage occurs on power up if the signal value is in
the valid range. Each joystick controller should
operate smoothly and provide proportional speed
control over its entire range of motion. The
remaining boom functions operate by on/off toggle
switches.
1-2 ALC-600 Ser vice Mode
® ™ ® ™
S -60 XC • S -65 XC

1 ALC-600 platform control module

2 drive/steer joystick controller
3 LED indicator module
4 primary boom up/down and turntable rotate
left/right joystick controller
Part No. 1288652GT
September 2018