Genie S-65 XC Service And Repair Manual page 74

Service and Repair Manual
Repair Procedures
8 Press the OK button to continue to capture the
maximum extension point.
9 Press the function enable and boom extend
buttons until the boom reaches its maximum
extension. Continue holding the buttons for
several seconds after the boom reaches its
maximum extension until the display indicates
the calibration point has been captured.
10 The calibration is complete.
11 Exit the Service Mode.
64
® ™ ® ™
S -60 XC • S -65 XC
September 2018
Part No. 1288652GT