Genie S-65 XC Service And Repair Manual page 43

September 2018
13 Reinstall the DISCON door using the Torx
head screws. Tighten, but do not overtighten.
14 Reinstall the ground box door to the ground
box, using the fasteners removed in step 7.
Tighten the fasteners securely.
15 Reinstall the E-Stop button, function enable
button and key switch and the contact
assemblies.
16 Reinstall the wire harness from the ground box
to the DISCON. Secure the harness to the
ground box lid using zip ties.
17 Close and fasten the ground box lid.
18 Reconnect the negative terminal to the start
battery and auxiliary batteries, if equipped.
Part No. 1288652GT
® ™ ® ™
S -60 XC • S -65 XC
Service and Repair Manual
Repair Procedures
33