ProMariner ProSport6 PFC Owner's Manual And Installation Manual page 22

W I R I N G D I A G R A M S
19
Typical Wiring
Fig. 4 ProSport 20, 12 and 8 Two Bank Charger for 2 12V Batteries
12 VDC Engine Start and a 12 Volt Trolling Motor or House Battery Configuration
Note:
Indicates jumper series
Indicates fuse
For engine battery use
Installation
When connecting each jacketed battery charger cable, make sure it is connected
to only one 12 VDC battery and observe the polarity and color of all connections:
Red Wire = + (Positive) Battery connection
Black Wire = - (Negative) Battery connection
The black wire can never be connected to a terminal with red wires. Only black.
Important: The pair of red and black wires in 1 cable jacket MUST GO TO THE SAME 12VDC battery.
Note 1: One bank cable connects to no more than one battery
Note 2: ProSport is designed to be used with group 24, 27, 30 and 31 batteries
with (2) 12 VDC Batteries
ProSport 12
cable 1
this bank cable only
_
bat 1
+
12 VDC Engine
Crank Battery
cable 2
_
bat 2
+
12 VDC Trolling
Motor or House Battery
Top view
of battery