ProMariner ProSport6 PFC Owner's Manual And Installation Manual page 20

W I R I N G D I A G R A M S
17
Typical Wiring
Fig. 2 ProSport 15 (OEM only) and 20 Three Bank Charger for 3 12V Batteries
24 VDC Trolling Motor Battery Configuration with (2) 12 VDC Batteries Connected
with a Series Jumper Plus Dedicated 12 VDC Engine Start Battery
Note:
Indicates jumper series
Indicates fuse
For engine battery use
this bank cable only
+
12 VDC Engine
Crank Battery
Installation
When connecting each jacketed battery charger cable, make sure it is connected
to only one 12 VDC battery and observe the polarity and color of all connections:
Red Wire = + (Positive) Battery connection
Black Wire = - (Negative) Battery connection
The black wire can never be connected to a terminal with red wires. Only black.
Important: The pair of red and black wires in 1 cable jacket MUST GO TO THE SAME 12VDC battery.
Note 1: One bank cable connects to no more than one battery
Note 2: ProSport is designed to be used with group 24, 27, 30 and 31 batteries
ProSport 20 Plus
cable 1
_
bat 1
+
Two 12 VDC Batteries connected with a series
jumper for a 24 VDC Trolling Motor
cable 2 cable 3
_
bat 2
+
_
Top view
bat 3
of battery