Advertisement
Quick Links
Download this manual
See also:
Instruction Manual
ProMar
Digital
Visit ProMariner online at www.promariner.com, for a complete
selection of quality marine products...
Here are just a few:
ProMite Series - Recreational Grade Waterproof Marine Battery Chargers
ProSport Series - Heavy Duty Recreational Grade Waterproof
Marine Battery Chargers
ProTournament Series - Professional Grade Tournament
Waterproof Marine Battery Chargers
ProIsoCharge Series - Digitally Controlled Zero Loss Charging Isolators
Digital Mobile Charge In-Transit Chargers
Battery Maintainers
AC Plug Holders
Battery Isolators
Isolation Transformers
Galvanic Isolators and Monitored Systems
Corrosion Control Products
Waterproof Marine Binoculars
Gold Plated Fuses and Holders
A Complete Line of Hand Held Test Meters
Online Technical Support and Service Support
Visit frequently, we are always adding new products for your
boating enjoyment!
Professional Mariner, LLC
200 International Drive, STE 195
Portsmouth, New Hampshire 03801
TEL: 603-433-4440
FAX: 603-433-4442
www.promariner.com
specifications subject to change without notice
ProMar
Performance Charging
ProNauticP Series Instruction Manual
Models
ProNautic1210P
ProNautic1215P
ProNautic1220P
ProNautic1230P
ProNautic1240P
ProNautic1250P
ProNautic1260P
ProNautic2420P
ProNautic2430P
IMPORTANT NOTICE
This manual contains important safety and operating instructions for the ProNauticP Series Chargers.
Please save and read all safety, operating and installation instructions before installing or applying
AC power to your ProNauticP Charger.
Your Satisfaction is Important to Us!
Do not return this product to retailer or dealer for any service or warranty requirements.
Please call our Customer Care Department at 800-824-0524 from 8:30 am to 5pm Eastern Time
for any warranty, service or installation assistance. Thank you - ProMariner Customer Care
PLEASE RECORD YOUR:
Model Number:
08/13 A
Digital
Part No.
Amperage
63110
10 Amps
63115
15 Amps
63120
20 Amps
63130
30 Amps
63140
40 Amps
63150
50 Amps
63160
60 Amps
63170
20 Amps
63180
30 Amps
Serial Number:
Performance Charging
Global AC Input
Power Factor Corrected
100-260 VAC 50/60 Hz
energy
saving
technology
BC
™
Banks
Volts
2 Banks
12
3 Banks
12
3 Banks
12
3 Banks
12
3 Banks
12
3 Banks
12
3 Banks
12
3 Banks
24
3 Banks
24
Date of Purchase:
Advertisement
Related Manuals for ProMariner ProNautic1210P
Summary of Contents for ProMariner ProNautic1210P
- Page 1 Portsmouth, New Hampshire 03801 Please call our Customer Care Department at 800-824-0524 from 8:30 am to 5pm Eastern Time TEL: 603-433-4440 for any warranty, service or installation assistance. Thank you - ProMariner Customer Care FAX: 603-433-4442 www.promariner.com PLEASE RECORD YOUR:...
- Page 2 Temperature Probe DAMAGE – If any parts are missing or damaged, or the unit has been damaged in shipping contact ProMariner Customer Service at 1-800-824-0524, please do not take it back to place of purchase. DO NOT attempt to install or operate the unit if it has been damaged in any way.
- Page 3 Notes Introduction ProNautic 60 P • Power Factor Corrected & Global AC Input ProMar Digital Performance Charging SYSTEM DC OUTPUT LEVELS AC Power Auto Temp Control Volts Amps Active PFC 100% Variable Speed Cooling Charger Output Standby AUTO CONSERVATION MODES Battery Health Program Charger Mode Charging...
- Page 4 Multiple Battery Type Charging Capability - User selected battery types including new technologies such as Lithium (LiFePO4) as well as a custom setting to manually To make a claim under warranty, go to www.promariner.com and click on the support tab select the desired voltages.
- Page 5 INSTALLING YOUR PRONAUTIC P SERIES CHARGER. This manual is written to assist in the installation of your new ProNauticP Series Charger; however, since this is a permanent AC and DC hardwired installation, ProMariner strongly recommends that a Certified Marine Electrical Technician ®...
- Page 6 Warning Typical Wiring Configurations Typical 2 Bank12 Volt DC Common Ground Installation: WARNING: HIGH VOLTAGE / ATTENTION : HAUTE TENSION AVOID SERIOUS INJURY OR DEATH FROM ELECTRICAL SHOCK. BEFORE OPENING TURN OFF AC SUPPLY POWER. CHOC ELECTRIQUES PEUVENT PROVOQUER LA MORT OU DE SERIEUSE BLESSURES. AVANT D'OUVRIR LA BOITE, COUPER LE COURANT.
-
Page 7: Important Safety Instructions
Important Safety Instructions Typical Wiring Configurations Typical 3 Bank12 Volt DC Common Ground Installation: 7. WARNING – RISK OF EXPLOSIVE GASES. a) WORKING IN THE VICINITY OF A LEAD-ACID BATTERY IS DANGEROUS. BATTERIES GENERATE EXPLOSIVE GASES DURING NORMAL BATTERY OPERATION. FOR THIS REASON, IT IS OF UTMOST IMPORTANCE THAT EACH TIME BEFORE USING YOUR CHARGER, YOU READ THIS MANUAL AND FOLLOW THE INSTRUCTIONS EXACTLY. - Page 8 DO NOT install in an open cockpit or deck where water is a factor. NOTE: ProMariner highly recommends that this unit be installed by an ABYC Certified Electrical Technician. Guidance from ABYC E-11 AC & DC electrical systems on board boats and ABYC A- 31 battery chargers and inverters is offered throughout this manual to ensure a safe, trouble free installation.
- Page 9 Otherwise, it may result in output reduction to protect internal components and the performance of the unit. Check intended installation spaces before installing to prevent unit thermal shutdown. Please note ProMariner recommends at least 6” of clearance space around all sides and the front of the charger for proper cooling.
- Page 10 6 Amp at 110 VAC please use a 10 amp breaker. • Power Factor Corrected & Global AC Input Charger Model 110-120 220-250 AC conductor volt breaker volt breaker size ProNautic1210P 5 Amp 5 Amp 16 AWG ProNautic1215P 10 Amp 5 Amp 16 AWG ProNautic1220P 10 Amp...
- Page 11 Maintenance Installation This unit is solid state and requires no constant adjustment or constant attention; however, Please note DC organizer is color the following items should be checked: coded ensuring proper polarity connections are made. Maintenance Item Start Up Monthly 1.
-
Page 12: Troubleshooting
Choose a fuse that is 10 amps higher than the charger output from ProMariner. For inquiries and service information Please call our Customer Care (e.g. 60 amps, choose a fuse of 70 amps). These fuses come in a variety of sizes and types. When... - Page 13 Programming Installation Optional Remote Installation 3. The Voltage and Amperage displays will show “FAC” “DEF” for factory default. 4. Press the SETUP/ENTER button to confirm selection, the charger will re-boot. A remote panel is available for your ProNauticP Charger. SELECTING THE POWER SUPPLY MODE The remote is provided with a cable and a network-type plug ProMar Digital...
-
Page 14: Setup And Operation
4. Press the SETUP/ENTER button to confirm selection. BATTERY TYPES - A word on battery types and the ProMariner ProNauticP. As noted in the Battery Selection NOTE: If no action is taken after 15 seconds, the unit reverts to 100% power. - Page 15 Setup and Operation Setup and Operation is a crucial step in ensuring your batteries longevity. ProMariner has pre-programmed the available settings Charger Service Conditions for optimum care of whatever type of battery you find suits your application. DC output service Indicates a reverse polarity situation DO NOT GUESS! If you are unsure of your battery type, contact the manufacturer of the battery.
- Page 16 Setup and Operation Setup and Operation The ProNauticP is a fully automatic battery charger. The features listed below can be selected during initial set-up (see Programming section) or upon a new battery installation. Normal LED Status Indicator Center operation does not require any intervention from the user. See the Maintenance section for Feature LED Color Function...