Assembly - The Handy THS50 Operator's Manual And Parts List

ASSEMBLY ­ STEP 2
•
Install the wheel assembly frame on
each side of the gearbox axle.
•
Take note of the position of the hole
on the gearbox axle as shown in the
diagram.
•
Insert the hex bolt M6x50 through
wheel assembly frame and the
hopper frame.
•
Fix together with lock nut M6.
•
Do not tighten the bolts yet.
•
Install the end of the frame brace
onto the hopper frame using hex bolt
M6x30 and lock nut M6.
•
Then install the other end of the
frame brace and fix using hex bolt
M6x45.
•
Do not tighten the nuts and bolts yet.
Page 5