The Handy THS50 Operator's Manual And Parts List page 7

ASSEMBLY ­ STEP 4
•
The upper handles have three
positions for the operator's comfort.
The upper handle can be fitted to
either of the two holes nearest the
handle grip.
•
To fix, insert a hex bolt through the
hole, the handle spacer and the
other handle.
•
Fix with a lock nut M6.
•
Do NOT tighten the nut yet.
•
Attach the gauge to the left hand
side using hex bolts M6x45 and lock
nuts M6.
•
Tighten the lock nuts on the gauge
first, then the handle.
•
Push the handle to lowest position.
•
Take off one of the nuts on the pivot
and bracket assembly and insert
head of threaded pole into the hole
of this part.
•
Reattach the nut and tighten.
Page 7