How To View Teamwork Control Information; Which Parameters Are Restored To Default Values After Default Settings Are Operated - Huawei NetCol5000-A User Manual

NetCol5000-A 42 kW Air Cooled In-row Precision Air
Conditioner
User Manual
----End

6.20 How to View Teamwork Control Information

Procedure
Step 1 On the home screen, choose
shown in
Figure 6-26 Teamwork control information screen
----End
6.21 Which Parameters Are Restored to Default Values
After Default Settings Are Operated
After choosing Settings > Restore Defaults > Yes, the following parameters are displayed:


Issue 01 (2017-07-27)
Figure 6-26.

Master/Slave and Active/Standby indicate the information of this single unit. Other information is
about the teamwork control information of the group.
 Required cooling capacity: indicates the total cooling/heating requirements of the group and is used
as a reference for enabling the cooling/heating mode by the master device. If the cascade function is
enabled, the capacity is used as a reference for determining whether to start a standby unit.
 Required humidity: indicates the total dehumidification and humidification requirements of the
group and is used as a reference for enabling the dehumidification and humidification mode by the
master device.
All parameters displayed on Settings > System Settings.
All parameters displayed on Settings > Alarm Settings.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
> . The teamwork control information is displayed, as
6 FAQ
237