Setting Communications Parameters (Modbus Settings) - Huawei NetCol5000-A User Manual

NetCol5000-A 42 kW Air Cooled In-row Precision Air
Conditioner
User Manual
Figure 4-13 Setting WiFi parameters
Step 2 Set the parameters by referring to
Table 4-7 WiFi settings
Parameter
WiFi SSID
WiFi Password
Enable WiFi
Step 3 Tap Submit.
----End

4.5.6 Setting Communications Parameters (Modbus Settings)

Context


Figure 4-14
Issue 01 (2017-07-27)
Setting Method
Set WiFi SSID based on the actual configuration; WiFi SSID is the
name used for the WiFi hotspot over which a mobile phone can
connect to the air conditioner.
Enter the WiFi password when you use a mobile phone to connect
to the WiFi. When you enable the WiFi function for the first time,
you need to set a password (the WiFi has no default password).
Enable the WiFi function. The default status is Disable.
To set communications parameters, log in as the admin user.
If Link mode is Server, a precision air conditioner can be accessed by a maximum of
two element management system (EMS) clients at the same time. If Link mode is Client,
a precision air conditioner can be connected only to the EMS with the corresponding IP
address. If Link mode is Server and client, a precision air conditioner can be accessed
by a maximum of two EMS clients and connect to the EMS with the corresponding IP
address at the same time.
shows the screen for setting the Modbus communications parameters.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Table 4-7.
4 Commissioning
101