Configure Ip Address Parameters - Kollmorgen AKD Manual

AKD PROFINET | 3 Installation and Setup

3.4 Configure IP Address Parameters

Start the SIMATIC Manager. To assign a new IP address, go to PLC->Edit Ethernet Node:
In the next dialog window, click on browse in the Ethernet node group and look for all
PROFINET devices in your network:
Select the AKD and click ok. If you have several AKD's in your network, you can also use
the MAC address to filter one PROFINET device.
To be sure, that the intended device is selected, you can click the "Flash" Button in the dia-
log. The display of selected device will flash as long as this function is active.
The MAC address can be found on the label of the AKD.
12 Kollmorgen | kdn.kollmorgen.com | November 2018