Configure Ip Address Parameters - Kollmorgen AKD Manual

AKD PROFINET | Table of Contents

3.4 Configure IP Address parameters

Start the SIMATIC Manager. To assign a new IP address, go to PLC->Edit Ethernet Node:
In the next dialog window, click on browse in the Ethernet node group and look for all PROFINET devices in your
network:
Select the AKD and click ok. If you have several AKD's in your network, you can also use the MAC address to
filter one PROFINET device.
To be sure, that the intended device is selected, you can click the "Flash" Button in the dialog. The display of
selected device will flash as long as this function is active.
The MAC address can be found on the label of the AKD.
14 Kollmorgen™ | March 2012