Voice Mail; Setting The Voice Mail Code; Leaving Voice Mails; Listening To Voice Mails - Yealink W90B User Manual

It is not applicable to CP930W.
Procedure
1. Enter the call pull feature access code (for example, *11).
2. Press the OK key to dial out.

Voice Mail

Voice Mail feature allows you to leave voice mails for someone or listen to your voice mail messages on
your IP phones. This feature is set up on the server-side and not all servers support this feature.
•

Setting the Voice Mail Code

•

Leaving Voice Mails

•

Listening to Voice Mails

Setting the Voice Mail Code
If you want to connect to the message center, you need to set the voice mail code on your phone.
Procedure
1. Go to OK > Voice Mail > Set Voice Mail.
On the CP930W, go to Menu > Message > Set Voice Mail Code.
On the DD phone, go to Menu > Message > Voice Mail > Set Voice Mail Code.
2. On the W59R/W56H/W53H/CP930W, select Enabled from the Status field.
3. Enter the voice mail code.
4. Confirm the action.
Leaving Voice Mails
You can leave a voice mail to someone who is busy or inconvenient to answer the call.
Procedure
1. Follow the voice prompts to leave a voice mail.
2. Hang up to complete the voice mail.
Listening to Voice Mails
You can listen to your voice mails on the handset directly.
Before you begin
You need to set the voice mail code in advance.
Procedure
1. Go to OK > Voice Mail > Play Message or press the Message key.
On the CP930W, go to Menu > Message > Play Message.
On the DD phone, go to Menu > Message > Voice Mail > View Voice Mail.
2. Follow the voice prompt from the system server to listen to your voice mails.
| Advanced Call Features | 45