Exit Menu - Kontron nanoETXexpress-SP User Manual

7.3.9 Exit Menu

Feature
Save To RTC/EEPROM and Exit
Save As Custom Defaults To RTC/Flash and Exit
Discard Changes and Exit
Discard Changes
Load Manufacturing Defaults
Load Custom Defaults
89
Description
Saving system setup to RTC and EEPROM and exit setup. F10 key
can be used for this operation
Saving system setup as custom defaults to RTC and Flash and exit
setup. F11 key can be used for this operation. Refer to Flash
Backup Feature for more details
Exit system setup without saving any changes. ESC key can be
used for this operation
Discards changes done so far to any of the setup questions. F7
key can be used for this operation
Load manufacturing default values for all the setup questions. F9
key can be used for this operation
Load custom default values for all the setup questions.
nanoETXexpress-SP/BIOS Operation