Troubleshooting And Service - Paramount Fitness Clear 03 Installation Manual

ISSUE
1. No air bubbles
entering system or pool
2. Filter empties and
pump loses prime
3. Light bulb does not light
CONVERTING BALLAST VOLTAGE TO ALTERNATE
at the breaker and remove the unit from
wall mounting.
With a Phillips screwdriver, remove the
2.
three (3) screws in the left end side cap,
labeled electrical connections. ( Fig. 31 )
Remove side cap by pulling out from the
3.
end of the unit.
4. Inside the open electrical housing, find
the light bulb plug and pull it out about
one inch. ( Fig. 32 )
For technical assistance call 1.800.621.5886 or contact your regional representative
TROUBLESHOOTING & SERVICE
SETTING
SOLUTION
Clean filter then adjust
airflow needle valve.
Replace check valve
fitting at strainer pot.
Check power to Clear
®
O3 , then replace bulb.
Fig. 31
Fig. 32
21