OPTIONAL SUBMERGED EQUIP. INSTALL.(CONT.)
Install the 3/8" OD x ¼ ID tubing on
5.
the barbed end of the venturi, with
the check valve installed in-line. Note
the correct direction of flow through
the check valve. (Fig. 19A & 19B)
Connect the tubing to the
6.
compression fitting. (Fig. 20)
Connect the compression fitting to
7.
the flow meter. (Fig 21)
Fig. 20
For technical assistance call 1.800.621.5886 or contact your regional representative
Fig. 19
Fig. 19B
Fig. 21
15