Main Menu - Danfoss VLT AutomationDrive FC 360 Quick Manual

User Interface and Programm...

4.3 Main Menu

The Main Menu gives access to all parameters.
1. To enter the Main Menu, press [Menu] until
indicator in display is placed above Main Menu.
▲ ▼
2.
[ ] [ ]: browse through the parameter groups.
3. Press [OK] to select a parameter group.
▲ ▼
4.
[ ] [ ]: browse through the parameters in the
specific group.
5. Press [OK] to select the parameter.
▲ ▼
6.
[►] and [ ] [ ]: set/change the parameter value.
7. Press [OK] to accept the value.
8. To exit, press either [Back] twice (or three times
for array parameters) to enter Main Menu, or
press [Menu] once to enter Status.
See Illustration 4.5 for the principles of changing the value
of continuous, enumerated and array parameters.
®
VLT AutomationDrive FC 360 Quick Guide
+
Illustration 4.5 Main Menu Interactions - Continuous
Parameters
®
MG06A302 - VLT is a registered Danfoss trademark
Setup 1
OK
1
Setup 1
2 x
2
OK
Setup 1
OK 3
Setup 1
4
Setup 1
5
Setup 1
6
Setup 1
7
Setup 1
8
Setup 1
12
11
10
4 4
9
OK
21