Rider's Seat - Triumph Tiger 800 XCA 2007 Owner's Handbook Manual

General Information
Passenger Seat Refit
2
cgif
1. Passenger seat brackets
2. Subframe loops
To refit the seat:
• Reconnect the heated seat's elec-
trical connector (if equipped).
• Engage the seat's two brackets un-
der the loops on the subframe.
• Press down at the rear to engage
in the seat lock.
104

Rider's Seat

The rider's seat is only correctly
retained and supported once the
passenger seat is correctly fitted.
2
Never ride the motorcycle with the
pillion seat detached or removed, as
the front seat will not be secure and
may move.
1
A loose or detached seat could cause
loss of motorcycle control and an
accident.
1.
To remove the rider's seat:
Warning
Rider's seat
• Remove the passenger seat (see
page 103).
• Grasp the rider's seat on either
side, and slide it rearwards and up-
wards.
• If equipped with heated seats, dis-
connect the heated seat's electrical
connector for complete removal
from the motorcycle.
1