Triumph Tiger 800 XCA 2007 Owner's Handbook Manual page 66

Instruments
Trip Meters
2
3
1. Trip meter display
2. Trip meter 1 display
3. Trip meter 2 display
To access the trip meters:
• Press and release the SET button
on the left hand switch housing un-
til the required trip meter is shown.
• Press and release the SCROLL but-
ton on the left hand switch hous-
ing.
• The display will show the journey
distance. This is the total journey
distance travelled since the trip
meter was last reset to zero.
Trip Meter Reset
To reset either of the trip meters:
• Select and display the trip meter to
be zeroed.
• Press and hold the SET button for
two seconds. After two seconds, all
items within the selected trip meter
will reset to zero.
66
1
Information Menu
To access the information menu:
• Turn the ignition to the ON position.
• Press and release the SET button
on the left hand switch housing un-
til InFo appears in the display
screen.
Note:
• InFo will appear in the display
screen for 0.5 seconds to indicate
that the information menu has been
selected. The display screen will
then change to display one of the
items listed below.
• Press and release the SCROLL but-
ton on the left hand switch hous-
ing. The display will scroll through
the information menu in the follow-
ing order when pressing down on
the SCROLL button (it will scroll
through in the reverse order when
pressing up on the SCROLL button):
– Range to empty
– Ambient air temperature
– Odometer
– Front tyre pressure (if TPMS is
fitted and activated)
– Rear tyre pressure (if TPMS is
fitted and activated)
– Instantaneous fuel consump-
tion.
Each display provides the following
information: