Triumph Tiger 800 XCA 2007 Owner's Handbook Manual page 84

General Information
Note:
• The fog lights switch will only
operate when the headlights are on.
• The fog lights switch will reset to
off when the ignition is turned off
then on again.
High Beam Button
The high beam button has a different
function depending on whether Daytime
Running Lights (DRL) are fitted or not.
When the high beam is turned on, the
high beam indicator light will illuminate
in the display.
Models with Daytime Running
Lights (DRL)
If the DRL switch is in the Daytime
Running Lights (DRL) position, then
press and hold the high beam button to
turn the high beam on. It will remain on
as long as the button is held in and will
turn off as soon as the button is
released.
If the DRL switch is in the dip beam
position, press the high beam button to
switch the high beam on. Each press of
the button will swap between dip and
high beam.
Note:
• A lighting on/off switch is not fitted
to this model. The rear light and
licence plate
automatically when the ignition is
turned to the ON position.
• The headlight will function when
the ignition is turned on and the
engine is running.
84
light all function
Models without Daytime Running
Lights (DRL)
Press the high beam button to switch
the high beam on. Each press of the
button will swap between dip and high
beam.
Note:
• A lighting on/off switch is not fitted
to this model. The position light,
rear light and licence plate light all
function automatically when the
ignition is turned to the ON position.
• The headlight will function when
the ignition is turned on and the
engine is running.
Rider and Passenger Heated Seat
Switch (if fitted)
The rider and passenger heated seats
will only heat when the engine is
running. When the heated seats are
switched on, then the heated seats
symbols will appear in the display. The
selected heat level will also be indicated
by the colour of the symbol.
For more information, see page 105.