Triumph Tiger 800 XCA 2007 Owner's Handbook Manual page 71

To Disable the ABS
To access the ABS Disable function:
• With the motorcycle stationary and
in neutral, turn the ignition to the
ON position.
• Press and release the SET button
on the left hand switch housing un-
til SEtUP is shown in the display
screen.
• Press and release the SCROLL but-
ton until AbS is shown.
• Press the SET button and On or
OFF will be displayed.
• Press and release the SCROLL but-
ton until OFF is shown in the dis-
play screen.
• Pressing the SET button will disable
the ABS system; OFF will be dis-
played for two seconds, and the
ABS warning light will be illuminat-
ed.
• Press the HOME button and trip 1
will be shown in the display screen.
Note:
• With the ABS disabled, the traction
control will still function (unless the
traction control is also disabled).
To Enable the ABS
To enable the ABS system again:
• Repeat the ABS disable procedure
and select on.
• Press the HOME button and trip 1
will be shown in the display screen.
• An alternative way to enable the
ABS is to turn the ignition off and
on.
Clock Adjustment – t-SEt
1
1. Time set
To reset the clock:
• With the motorcycle stationary and
in neutral turn the ignition to the
ON position.
• Press and release the SET button
on the left hand switch housing un-
til SEtUP is shown in the display
screen.
• Press and release the SCROLL but-
ton until t-SEt is shown.
• Press the SET button again and ei-
ther 24 Hr or 12 Hr clock will be
shown.
• Press the SCROLL button to select
the required clock display and then
press the SET button. The hour dis-
play will start to flash and the word
Hour is shown in the display screen.
Instruments
71