Left Handlebar Switches - Triumph Tiger 800 XCA 2007 Owner's Handbook Manual

Table of Contents

Advertisement

Note:
Although the engine stop switch
stops the engine, it does not turn
off all the electrical circuits and
may cause difficulty in restarting
the engine due to a discharged
battery. Ordinarily, only the ignition
switch should be used to stop the
engine.
Caution
Do not leave the ignition switch in the
ON position unless the engine is
running as this may cause damage to
electrical
components
discharge the battery.
Starter Button
The starter button operates the electric
starter. For the starter to operate, the
clutch lever must be pulled to the
handlebar.
Note:
Even if the clutch lever is pulled to
the handlebar, the starter will not
operate if the side stand is down
and a gear is engaged.
Hazard Warning Lights
To turn the hazard warning lights on or
off, press the hazard warning light
button.
The ignition must be switched ON for
the hazard warning lights to function,
but the hazard warning lights remain on
if the ignition is switched OFF until the
hazard warning light button is pressed
again.

Left Handlebar Switches

All Models except Tiger 800 XR
10
ckdf
1.
and
will
2.
3.
4.
5.
6.
7.
8.
9.
10.
The following sections describe the
handlebar
functions.
Cruise Control Adjust Button
The cruise control adjust button is a
two way switch with the top marked
RES/+ and the bottom marked SET/-.
For more information on cruise control
operation, see page 90.
General Information
9
8
7
6
Cruise control adjust switch
Daytime Running Lights (DRL) switch
(if fitted)
MODE button
Direction indicator switch
Joystick button
Horn button
Heated grips switch
Front fog lights switch (if fitted)
High beam button
Rider and passenger heated seats
switch (if fitted)
buttons
1
2
3
4
5
and
switches
81

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents