Oil And Oil Filter Change - Triumph Tiger 800 XCA 2007 Owner's Handbook Manual

Note:
• An accurate indication of the level
of oil in the engine is only shown
when the engine is at normal
operating temperature
motorcycle is upright (not on the
side stand).
• When correct, oil should be visible
in the sight glass at a point midway
between the upper (maximum) and
lower (minimum) horizontal lines
marked on the crankcase.
• If it is necessary to top up the oil
level, remove the filler plug and add
oil, a little at a time, until the level
registered in the sight glass is cor-
rect.
Once the correct level is reached, fit and
tighten the filler plug.

Oil and Oil Filter Change

Warning
Prolonged or repeated contact with
engine oil can lead to skin dryness,
irritation and dermatitis. In addition,
used engine oil
contamination that can lead to skin
cancer.
Always wear
clothing and avoid skin contact with
used oil.
and
contains harmful
suitable protective
The engine oil and filter must be
replaced in accordance with scheduled
maintenance requirements.
the
2
cgip
1. Oil drain plug
2. Oil filter
To change the oil and oil filter:
• Warm up the engine thoroughly,
and then stop the engine and se-
cure the motorcycle in an upright
position on level ground.
• Place an oil drain pan beneath the
engine.
• Remove the oil drain plug.
Maintenance
1
141