Triumph Tiger 800 XCA 2007 Owner's Handbook Manual page 129

Tyres
High speed operation is hard on tyres,
and tyres that are in good condition are
crucial to riding safely. Examine their
overall condition, inflate to the correct
pressure (when the tyres are cold), and
check the wheel balance. Securely fit
the valve caps after checking tyre
pressures. Observe
given in the
specification sections on tyre checking
and tyre safety.
Fuel
Have sufficient fuel for the increased
fuel consumption that will result from
high speed operation.
Caution
In many countries, the exhaust system
for this model is fitted with a catalytic
converter to help reduce exhaust
emission levels.
The catalytic
permanently
motorcycle is allowed to run out of fuel
or if the fuel level is allowed to get very
low.
Always make sure you have adequate
fuel for your journey.
Engine Oil
Check that the engine oil level is correct.
Make sure that the correct grade and
type of oil is used when topping up.
Drive Chain
Make sure that the drive chain is
correctly adjusted
Inspect the chain for wear and damage.
the information
maintenance
converter can
damaged if
and lubricated.
How to Ride the Motorcycle
Coolant
Check that the coolant level is at the
upper level line in the expansion tank.
Always check the level with the engine
cold.
Electrical Equipment
Make sure that all electrical equipment
such as the headlight, rear/brake light,
and
direction indicators and horn all work
correctly.
Miscellaneous
Visually check that all fixings are tight.
be
the
129