Seats; Passenger Seat - Triumph Tiger 800 XCA 2007 Owner's Handbook Manual

Table of Contents

Advertisement

Seats

Seat Care
To prevent damage to the seat or seat
cover, care must be taken not to drop or
lean the seat against any surface which
may damage the seat or seat cover.
See page 187 for seat cleaning informa-
tion.
Caution
To prevent damage to the seat or seat
cover, care must be taken not to drop
the seat. Do not lean the seat against
the motorcycle or any surface which
may damage the seat or seat cover.
Instead, place the seat, with the seat
cover facing upwards, on a clean, flat
surface which is covered with a soft
cloth.
Do not place any item on the seat
which may cause damage or staining
to the seat cover.

Passenger Seat

Warning
The rider's seat is only correctly
retained and supported once the
passenger seat is correctly fitted.
Never ride the motorcycle with the
passenger seat detached or removed,
as the front seat will not be secure and
may move.
A loose or detached seat could cause
loss of motorcycle control and an
accident.
General Information
Warning
To prevent detachment of the seat
during riding, after fitting always grasp
the seat and pull firmly upwards.
If the seat is not correctly secured, it
will detach from the lock.
A loose or detached seat could cause
loss of motorcycle control and an
accident.
The seat lock is located on the rear
mudguard, below the rear light unit.
Passenger Seat Removal
1.
Seat lock
To remove the passenger seat:
• Insert the ignition key into the seat
lock.
• Turn the ignition key anticlockwise
while pressing down on the rear of
the seat. This will release the seat
from its lock and allow it to be slid
rearwards.
• If equipped with heated seats, dis-
connect the heated seat's electrical
connector for complete removal
from the motorcycle.
1
103

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents