Electrical Accessory Socket - Triumph Tiger 800 XCA 2007 Owner's Handbook Manual

To attach a helmet to the motorcycle:
• Remove the passenger seat.
• Loop the helmet chin strap over the
hook.
• Make sure that the flat area above
the hook is not obstructed by the
helmet strap, as this will prevent
the passenger seat engaging cor-
rectly.
1
cgif
1. Helmet hook flat area
To secure the helmet, refit the seat and
lock into position.
General Information

Electrical Accessory Socket

1
1. Ignition switch socket (all models)
All models have a socket located next to
the ignition switch.
The sockets will provide a 12 Volt
electrical supply.
The electrical accessory socket circuit is
protected by the specified fuse shown
in the fuse chart on page 178.
To protect the battery from excessive
discharge while using fitted electrical
accessories, the combined total current
which may be drawn through the
electrical accessory sockets is five
Amps.
A plug, suitable for use with the
electrical accessory sockets, is available
from your authorised Triumph dealer.
109