Assembly/Dismantling Stone And Options; Dismantling Stone - RIKA TOPOII Operating Manual

6. ASSEMBLY/DISMANTLING STONE AND OPTIONS

Note
Only work on the unit when the mains plug has been disconnected and the
stove has cooled completely.
Note
During assembly / dismantling do not allow objects (screws etc.) to fall into
the pellet container – they can block the screw conveyor and damage the
stove.
Note
During any conversion work, take particular care of your fingers and any
panels and stove attachments.
Select soft bases to prevent scratches to your living space furniture and
stove panels.

Dismantling stone

Open the convection cover so far that the cover securing mechanism locks into
the designated retaining bracket.
Loosen the three Allen screws, which are provided for mounting the stone
bracke
You can now move the stone bracket to the top, lift the stone covering and
place it on a soft surface.
Open the container lid.
Loosen the two hex nuts in the container intended for fixing the stone bracket.
Now you can tip out the stone cladding including stone bracket and place it on
a soft surface.
# 8
Re-assemble the parts in reverse order
#8
|13
12