Dismantling the left side trim
Open the convection cover so far that the cover securing mechanism locks into
the designated retaining bracket.
Remove the two vertical hexagonal screws which are used to fasten the left
side cover.
You can now lift the left side cover and place it on a soft surface.
Re-assemble the parts in reverse order
Dismantling the right side trim
Open the container lid.
Remove the hex screw that is used to secure the side panel to the right.
# 8
You can now lift the side panel after disconnectting the internal control unit and
place it on a soft surface.
Re-assemble the parts in reverse order
#8