Assembly Options; Converting To Rear Flue Pipe Connection - RIKA LOOK RLU Operating Manual

5. ASSEMBLY OPTIONS

Note
Only work on the unit when the stove has cooled down completely�
Note
During any conversion work, take particular care of your fingers
and any panels and stove attachments� Select soft bases to
prevent scratches to your living space furniture and stove panels�

Converting to rear flue pipe connection

(to be ordered separately)
Cut the rear wall along the perforation with a hacksaw�
Remove the screws of the flue outlet on top�
Remove the flue outlet carefully not to scratch the panel� Proceed in
the same way with the rear blind cover�
Replace the flue outlet from the top and the cover from behind
against each other� Make sure that everything is air tight!
Screw the washers with the nuts on the pre-assembled thread on the
bottom of the cover (circled green)�
Then insert the supplied top cover�
#25
#25
#25
#8
|13
12